The Squat: Don't Be a Moron

/ Testify Strength & Conditioning/

A lot of good advice in life can be summed up with the phrase, “Don’t be a moron,” and racking the squat is certainly no exception.

Listen, in the time it took you to squat your work set, the hooks (you know - the things the bar rests upon in the rack) didn’t go anywhere, so when you rack the bar, quit looking for them. Some lifters are either under the impression that their hooks have the ability to wander off while they squat, or they think they have incredibly cruel training partners who will steal their hooks while they squat.

You, however, are not one of these lifters. When finished with your set of squats, you just keep looking at your focal point (the same one you stared at while squatting) or you look straight ahead, and you then simply walk the barbell forward until it hits the uprights, whereupon you set it down - magically - on the hooks. You know that if you stay nice and tall as you walk back to the rack, hitting the uprights guarantees the bar will be over the hooks.

You also know that if you develop the silly-looking habit of craning your neck to look for the hooks, you’ll tend to walk the bar back to the rack in a rather cattywampus fashion, and one day, you’ll eventually miss one of the hooks (i.e., the one you’re not looking at). This makes for a wonderful YouTube video but a rather disastrous training experience. Fortunately, you don’t do this.

But . . . perhaps your friend does this. In this case, be sure to tell him, “Hey - don’t be a moron.”

As always, we hope this helps you get stronger and live better.

(Some links may be affiliate links. As an Amazon Associate, Testify earns from qualifying purchases.)

If you found this helpful, you’ll love our weekly email. It’s got useful videos, articles, and training tips just like the one in this article. Sign up below, and of course, if you don’t love it, you can unsubscribe at any time.

At Testify, we offer small group training, private coaching (in-person or remotely via Zoom), online coaching, and form checks. Interested in getting stronger, looking better, and having more energy?

Book a free intro

Week 2022.10.24

/

Reminder: The gym will be closed for training on Saturday, 10/29/22, as we are hosting the annual Testify Fall Classic strengthlifting meet.

This Week’s Conditioning

Option 1
Sled
Outdoors:
10-20 x 25 yds EMOM at a weight of your choice

Every minute, push the sled 25 yards, i.e., if pushing the sled takes 20 seconds, then you have 40 seconds to rest. Perform 10-20 rounds.

Indoors:
10-20 x 100 ft EMOM at a weight of your choice

Every minute, push the sled 100 feet, i.e., if pushing the sled takes 20 seconds, then you have 40 seconds to rest. Perform 10-20 rounds.

Compare to 2022.08.22.

Option 2
Bike/row:
4 x 3 minutes

Rest 3 minutes between each round. Score = lowest distance.

Compare to 2022.08.01.

Option 3
Outdoors:
5-10 rounds:
10 sledgehammer strikes (5R, 5L)
50 yd farmer carry (25 yd down-back)
Rest 1 minute

Indoors:
5-10 rounds:
10 sledgehammer strikes (5R, 5L)
100 ft farmer carry (50 ft down-back)
Rest 1 minute

Compare to 2022.07.04.

Option 4
1. 5 yoke carries @ 30 yd (15 yd downback) – work up to heaviest carry
2. 5 rounds of 5 reps on the axle “clean and press away” – work up to heavy set of 5

Compare to 2022.07.04.

Knee Position in the Split Jerk

/ Testify Strength & Conditioning/

A common problem with new lifters and the split jerk - and it can be a problem with experience lifters, too - is that of knee position. The back knee often requires a bit more attention than the front knee, but we'll cover the front knee position briefly before moving on to the back knee.

Figure 1

For a demonstration of these problems and their solutions, check out the short video included near the end of this article.

Problem #1: Front Shin Angled Forward
When you lock the barbell out overhead in the split jerk, you want the front shin to be roughly vertical as Becky demonstrates in Figure 1, so if you find that your shin tends to be angled forward when you land as Becky demonstrates in Figure 2, you probably need to reach further with your front foot.

Figure 2: front shin angled forward

How to Fix This Problem
To help with this, try cueing yourself to reach further - specifically, reach forward with your front heel. Thus, the cue is “front heel forward” or “reach with your heel.”

If necessary, you can picture yourself landing with your front shin actually angled backward. In other words, envision your landing position with your front heel ahead of your front knee. While this mental picture is an exaggerated one and not the actual position we want (and thus represents an overcue), it can occasionally be useful in achieving the correct position.

Problem #2: Back Knee Completely Straight
As for the back leg, we want the knee to be bent or unlocked with the back heel off the ground as you see Becky demonstrate in Figure 1.

Figure 3: don’t do this.

While the knee bend is not going to be 90 degrees - so don't do what Becky’s doing in Figure 3 - we certainly don't want the back knee to be completely straight either, and that's a common problem that needs to be addressed.

A straight back leg tends to jam the lifter forward onto the front foot. Note the difference between the correct position in Figure 4a versus the straight leg position in Figure 4b.

If you find that you're landing forward with an excessive amount of weight on your front foot, it's very possible that you need to bend your back knee.

Another problem with a straight back leg is that the depth or amount of drop you can achieve in the split should come from the hip joint and the knee joints of both legs. You can clearly see this with the front leg - the hip is flexed (i.e., bent), and the knee is bent, and those two factors together allow the lifter to drop down into position.

Figure 4a (left) vs Figure 4b (right)

The hip and knee of the back leg should also contribute to the drop, but if the back knee is completely straight, it can't contribute to the dropping motion. This will typically mean that the only way to drop lower is to bend the front knee even more, which then pushes the front knee forward into a weaker position.

On a lesser note, allowing the back knee to bend means the hip of the back leg doesn't have to occupy as severe an angle as it otherwise would. Again, note the difference between the two positions shown in Figure 4a and 4b - if you try this yourself, you'll note the difference in sensation at the hip as well as in the low back. The bent knee position will feel stronger and more stable.

How to Fix This Problem
To help fix a straight back leg, try one of the following cues immediately before performing the jerk:

  • The most straightforward approach is simply “bend the back knee” or “bend the knee.”

  • If the above cue doesn’t work, try “drop the back knee” or simply “back knee down.”

  • Finally, you can also cue yourself to land with more weight on your back leg or foot.

As always, we hope this helps you get stronger and live better.

(Some links may be affiliate links. As an Amazon Associate, Testify earns from qualifying purchases.)

If you found this helpful, you’ll love our weekly email. It’s got useful videos, articles, and training tips just like the one in this article. Sign up below, and of course, if you don’t love it, you can unsubscribe at any time.

At Testify, we offer small group training, private coaching (in-person or remotely via Zoom), online coaching, and form checks. Would you like to get quality coaching from a Starting Strength Coach?

Click here to start today

Week 2022.10.17

/

This Week’s Conditioning

Option 1
Sled
Outdoors:
10 rounds of:
Push sled 100 ft
Pull sled 100 ft (hand over hand)

Indoors:
20 rounds of:
Push sled 50 ft
Pull sled 50 ft (hand over hand)

Compare to 2022.08.15.

Option 2
Bike/row:
5 min on
4 min off
4 min on
3 min off
3 min on
2 min off
2 min on
1 min off
1 min on

Record distance for each interval and add for total distance.

Compare to 2022.07.25.

Option 3
5-10 rounds of:
30 sec ME tire flips
30 sec rest

Compare to 2022.06.27.

Option 4
Sandbag-over-bars
Set yoke at #33 for women or #35 for men.
1. 1 minute AMRAP
2. 5 rounds of 2 reps every 2 minutes (speed!)
3. 1 minute AMRAP

Weights
Female under 40 years
140 lbs and under: 75 lbs
140.1 lbs – 185 lbs: 100 lbs
185.1 lbs and over: 150 lbs

Female 40 years and over
140 lbs and under: 50 lbs
185 lbs and under: 75 lbs
185.1 lbs and over: 100 lbs

Male under 40 years
185 lbs and under: 150 lbs
185.1 lbs – 235 lbs: 200 lbs
235.1 lbs and over: 250 lbs

Male 40 years and over
185 lbs and under: 100 lbs
185.1 lbs – 235 lbs: 150 lbs
235.1 lbs and over: 200 lbs

Compare to 2022.06.27.

Are You Ruining the EASIEST Part of the Deadlift?

/ Testify Strength & Conditioning/

Lowering the deadlift back to the ground should be the easiest part of the lift, but for many lifters - usually newer lifters, but not always - this portion of the lift presents some difficulties. Let’s remedy this situation (and for a look at these solutions in action, check out the included short videos).

The Problem
When we teach the lowering portion of the deadlift, we cue people to reach back with the hips and slide the barbell down the thighs, bending at the hips in the process. A significant (and common) problem arises, however, when the lifter tries to keep his back vertical while setting the bar down. We have these wonderful things called knees, and when we try to keep the back vertical (i.e., when we try to remain upright) when lowering the deadlift, we end up having to lower the bar around the knees instead of in a nice, easy, vertical path straight back down to the ground.

Lowering the bar around the knees makes the lowering process much harder and indeed rather uncomfortable. Additionally, it causes the lifter to set the bar down in the wrong place (i.e., in front of the midfoot instead of directly over the midfoot), which means the lifter now has to correct the bar position before the next rep. This is an additional and unnecessary variable that now has to be handled, so let’s fix this with the two solutions below.

In what is a counterintuitive moment for many people, trying to keep the back more vertical actually makes things harder on the back . . . so let’s not do that.

Solution #1
One useful approach is to look at the middle of your foot when setting the bar down and tell yourself to sight the bar into place. In other words, you are aiming for the middle of your foot. The act of looking at the middle of the foot tends to cause most people to bend over, which is exactly what we want.

Solution #2
However, if that doesn’t work for you, give yourself the following cue: “Bow to the floor.” It’s that simple. The act of bowing to someone or something involves bending at the hips and keeping the knees relatively straight (we’re not looking for locked knees), and this is exactly what we want to do when setting the bar down. The knees do get to bend eventually, but they bend very little until after the bar passes them.

So, the next time you are lowering your deadlift, tell yourself to bow to the floor, and then set the bar down quickly. It makes life a lot easier, and you can use the energy you just saved on your next rep.

As always, we hope this helps you get stronger and live better.

(Some links may be affiliate links. As an Amazon Associate, Testify earns from qualifying purchases.)

If you found this helpful, you’ll love our weekly email. It’s got useful videos, articles, and training tips just like the one in this article. Sign up below, and of course, if you don’t love it, you can unsubscribe at any time.

At Testify, we offer small group training, private coaching (in-person or remotely via Zoom), online coaching, and form checks. Would you like to get quality coaching from a Starting Strength Coach?

Click here to start today

Week 2022.10.10

/

This Week’s Conditioning

Option 1
Sled Pyramid – 4, 5, or 6 tiers
Go up and down a 4, 5, or 6 tier “sled pyramid” – rest as needed. The distance for each round is 80 m indoors (a down-back on the 40m course) or 200 ft outdoors (2 down-backs on the 50 ft course). Rest as needed.

For example, Bob does the following (4 tiers):
Round 1: Empty sled
Round 2: 25#
Round 3: 50#
Round 4: 75#
Round 5: 50#
Round 6: 25#
Round 7: Empty sled

Compare to 2022.08.08.

Option 2
Bike/row:
4 x 3 minutes

Rest 3 minutes between each round. Score = lowest distance.

Compare to 2022.07.18.

Option 3
Outdoors:
5-10 rounds:
10 sledgehammer strikes (5R, 5L)
50 yd farmer carry (25 yd down-back)
Rest 1 minute

Indoors:
5-10 rounds:
10 sledgehammer strikes (5R, 5L)
100 ft farmer carry (50 ft down-back)
Rest 1 minute

Compare to 2022.06.20.

Option 4
1. 5 yoke carries @ 30 yd (15 yd downback) – work up to heaviest carry
2. 5 rounds of 5 reps on the axle “clean and press away” – work up to heavy set of 5

Compare to 2022.06.20.