Are You Finishing Your Deadlift Wrong?

A common problem in the deadlift is a misunderstanding of what finishing the lift should look and feel like. This typically results in one of two situations - a lifter who doesn’t completely open the hips and therefore doesn’t actually complete the rep or a lifter who overdoes it and ends up finishing the lift with the back in overextension.

One of these results is insufficient, and the other is unnecessary. Both of them look ridiculous, so we’re going to try and fix this.

To see these errors demonstrated as well as how to correct them, watch the video below.

A finished deadlift (Figure 1) will have the knees fully extended, the hips fully extended, the chest up, and the shoulders back. In other words, the knees will be straight, the hips will be straight, and the shoulders will be behind the barbell. In even simpler terms, the lifter simply stands all the way up.

Figure 1: A correctly finished deadlift

If you find that you’re not finishing your deadlift, i.e., if your hips don’t open all the way and you look like you’re leaning over the bar like the fool in Figure 2, simply cue yourself to “Stand up” or “Stand up tall.”

Figure 2: An unfinished deadlift - don’t be like this fool.

If, on the other hand, you find that you’re overdoing the top of the deadlift, i.e., if you’re finishing the lift with your lumber spine in overextension (Figure 3), you can still use the cue “Stand up” (or “stand tall”) or you can also simply tell yourself, “Don’t lean back.”

Figure 3: An “overdone” deadlift - don’t be like this fool, either.

Fixing either of these problems is not complicated, but you’ve got to be aware that you have the problem in order to fix it, so we recommend that you either have a coach, or if that’s not possible, make sure that you record your lifts so that you can watch them.

As always, we hope this helps you get stronger and live better.

(Some links may be affiliate links. As an Amazon Associate, Testify earns from qualifying purchases.)

If you found this helpful, you’ll love our weekly email. It’s got useful videos, articles, and training tips just like the one in this article. Sign up below, and of course, if you don’t love it, you can unsubscribe at any time.


At Testify, we offer small group training, private coaching (in-person or remotely via Zoom), online coaching, and form checks. Interested in getting stronger, looking better, and having more energy?

book a free intro

Week 2022.11.07

Reminder: The gym will have modified training hours on Friday, 11/11/22, and Saturday, 11/12/22, as we are hosting the Starting Strength Coaches Conference that weekend.

  • Friday hours: 5:00 a.m. - 12:00 p.m. (no afternoon hours)

  • Saturday hours: 7:00 a.m. - 9:00 a.m.

This Week’s Conditioning

Option 1
Sled Pyramid – 4, 5, or 6 tiers
Go up and down a 4, 5, or 6 tier “sled pyramid” – rest as needed. The distance for each round is 80 m indoors (a down-back on the 40m course) or 200 ft outdoors (2 down-backs on the 50 ft course). Rest as needed.

For example, Bob does the following (4 tiers):
Round 1: Empty sled
Round 2: 25#
Round 3: 50#
Round 4: 75#
Round 5: 50#
Round 6: 25#
Round 7: Empty sled

Compare to 2022.09.05.

Option 2
Bike/row:
8 x 30 sec on/2:00 off

Score = least distance covered in any 30 second interval

Compare to 2022.08.15.

Option 3
8 rounds:
Outdoors:
4 tire flips
50 yd sled push (25 yd down-back)
Rest 1 minute

Indoors:
4 tire flips
100 ft sled push (50 ft down-back)
Rest 1 minute

Compare to 2022.07.18.

Option 4
Sandbag-over-bars
Set yoke at #33 for women or #35 for men.
1. 1 minute AMRAP
2. 5 rounds of 2 reps every 2 minutes (speed!)
3. 1 minute AMRAP

Weights
Female under 40 years
140 lbs and under: 75 lbs
140.1 lbs – 185 lbs: 100 lbs
185.1 lbs and over: 150 lbs

Female 40 years and over
140 lbs and under: 50 lbs
185 lbs and under: 75 lbs
185.1 lbs and over: 100 lbs

Male under 40 years
185 lbs and under: 150 lbs
185.1 lbs – 235 lbs: 200 lbs
235.1 lbs and over: 250 lbs

Male 40 years and over
185 lbs and under: 100 lbs
185.1 lbs – 235 lbs: 150 lbs
235.1 lbs and over: 200 lbs

Compare to 2022.7.18.

How to Easily Build a Lifting Platform (and the EASIEST way to cut stall mats)

A lifting platform is a very important part of your gym - it protects your equipment as well as your floor, it dampens the noise and vibrations of deadlifts, cleans, snatches, etc., and it clearly delineates the lifting space. This last factor - the abundantly clear “stay out of my lifting space” effect of the platform - is very useful when you have a training partner or little kids with you in the gym.

Fortunately, building a lifting platform is quite easy. In fact, “building” is a rather generous term for the process - we’re pretty much just assembling a platform. We’ll lay out the steps below, but I’d strongly recommend watching one of the videos linked throughout this article for a better understanding of the process.

First, lay two 4’ x 8’ sheets of OSB next to one another. I’d recommend what is commonly referred to as 3/4"-thick OSB, but the actual dimension will be listed as 23/32”.

Laying down the base layer of OSB sheets

These two sheets will run lengthwise, i.e., they’re run front-to-back. The sheets will probably have a slight bow to them (i.e., a curvature), and you’ll want to make sure that the crown of the board is up (so the board should make a mountain, not a valley).

Next, lay two more sheets of the same OSB on top of the base layer. These sheets will be perpendicular to the base layer sheets, so they’ll run side-to-side. Again, the crown should be up. Then you’ll use 1-1/4” screws to attach the second layer to the base layer. We use three screws on the short end of each board and four screws along the long end.

Laying down the 2nd layer of OSB sheets

Then, for the top layer, you’ll use a sheet of 3/4”-thick MDF to run down the middle. You could use something nicer like oak, but we like MDF as it’s nice and heavy and causes everything to lie nice and flat. You’ll need to do some cutting on the MDF as they are sized at 49” x 97”. You’ll cut the length to 96” (8 feet), and we recommend cutting the width to 42” (3.5 feet) as this gives you ample room between the plates and the MDF when you set down your deadlifts, cleans, etc (you can go with 4 feet wide, but 3.5 feet makes it much less likely that you’ll chip the MDF over time). You can do this yourself, or your lumber store may be willing to rip it for you.

Finally, you’ll use 3/4”-thick horse stall mats for the rest of the top layer. Stall mats are typically 4’ x 6’, so you’ll have some cutting to do here. The bigger piece on each side will be 72” x 27” (i.e., 6’ x 2’3”), and the smaller piece on each side will be 24” x 27” (i.e., 2’ x 2’3”). 

To attach the top layer to the second layer, use 1-5/8” screws. We put six screws into the MDF - three in front and three in back. For the stall mats, we simply put screws around the outside, front, and back of the platform - we don’t put any screws down the rubber edge near the MDF so that we can’t accidentally set our metal plates or bumper plates down on a screw that might be a bit proud.

Last note - when cutting stall mats, use a jig saw. It is - by far - the best way to do it. Check out the video above to see this process.

We hope this helps you quickly and easily build a lifting platform, and as always, we hope this helps you get stronger and live better.

Finished platform - complete with Addy, Milo, & Parker

(Some links may be affiliate links. As an Amazon Associate, Testify earns from qualifying purchases.)

If you found this helpful, you’ll love our weekly email. It’s got useful videos, articles, and training tips just like the one in this article. Sign up below, and of course, if you don’t love it, you can unsubscribe at any time.


At Testify, we offer small group training, private coaching (in-person or remotely via Zoom), online coaching, and form checks. Interested in getting stronger, looking better, and having more energy?

book a free intro

Week 2022.10.31

Congratulations to everyone who competed at this past weekend’s Testify Fall Classic and thank you so much to everyone who helped out! Judges, loaders, table officials, those who helped set up and tear down - you all were wonderful, and we absolutely could not have done it without you!

This Week’s Conditioning

Option 1
Sled
Outdoors:
10 rounds of:
Push sled 100 ft
Pull sled 100 ft (hand over hand)

Indoors:
20 rounds of:
Push sled 50 ft
Pull sled 50 ft (hand over hand)

Compare to 2022.08.29.

Option 2
Bike/row:
4 x 800m

Rest 3 minutes between each round. Score = slowest time.

Compare to 2022.08.08.

Option 3
Outdoors:
10 rounds:
25 yd yoke carry
Rest 1 minute

Indoors:
10 rounds:
30 yd yoke carry (15 yd down-back)
Rest 1 minute

Compare to 2022.07.11.

Option 4
10 x 50 ft farmer carry
Each carry is 25 ft down and 25 ft back and is for time. Rest 1 minute between carries.

Women: 97# per handle (80# of plates)
Men: 137# per handle (120# of plates)
(Note: Each handle weighs 17#.)

Compare to 2022.07.11.

The Squat: Don't Be a Moron

A lot of good advice in life can be summed up with the phrase, “Don’t be a moron,” and racking the squat is certainly no exception.

Listen, in the time it took you to squat your work set, the hooks (you know - the things the bar rests upon in the rack) didn’t go anywhere, so when you rack the bar, quit looking for them. Some lifters are either under the impression that their hooks have the ability to wander off while they squat, or they think they have incredibly cruel training partners who will steal their hooks while they squat.

You, however, are not one of these lifters. When finished with your set of squats, you just keep looking at your focal point (the same one you stared at while squatting) or you look straight ahead, and you then simply walk the barbell forward until it hits the uprights, whereupon you set it down - magically - on the hooks. You know that if you stay nice and tall as you walk back to the rack, hitting the uprights guarantees the bar will be over the hooks.

You also know that if you develop the silly-looking habit of craning your neck to look for the hooks, you’ll tend to walk the bar back to the rack in a rather cattywampus fashion, and one day, you’ll eventually miss one of the hooks (i.e., the one you’re not looking at). This makes for a wonderful YouTube video but a rather disastrous training experience. Fortunately, you don’t do this.

But . . . perhaps your friend does this. In this case, be sure to tell him, “Hey - don’t be a moron.”

As always, we hope this helps you get stronger and live better.

(Some links may be affiliate links. As an Amazon Associate, Testify earns from qualifying purchases.)

If you found this helpful, you’ll love our weekly email. It’s got useful videos, articles, and training tips just like the one in this article. Sign up below, and of course, if you don’t love it, you can unsubscribe at any time.


At Testify, we offer small group training, private coaching (in-person or remotely via Zoom), online coaching, and form checks. Interested in getting stronger, looking better, and having more energy?

Book a free intro

Week 2022.10.24

Reminder: The gym will be closed for training on Saturday, 10/29/22, as we are hosting the annual Testify Fall Classic strengthlifting meet.

This Week’s Conditioning

Option 1
Sled
Outdoors:
10-20 x 25 yds EMOM at a weight of your choice

Every minute, push the sled 25 yards, i.e., if pushing the sled takes 20 seconds, then you have 40 seconds to rest. Perform 10-20 rounds.

Indoors:
10-20 x 100 ft EMOM at a weight of your choice

Every minute, push the sled 100 feet, i.e., if pushing the sled takes 20 seconds, then you have 40 seconds to rest. Perform 10-20 rounds.

Compare to 2022.08.22.

Option 2
Bike/row:
4 x 3 minutes

Rest 3 minutes between each round. Score = lowest distance.

Compare to 2022.08.01.

Option 3
Outdoors:
5-10 rounds:
10 sledgehammer strikes (5R, 5L)
50 yd farmer carry (25 yd down-back)
Rest 1 minute

Indoors:
5-10 rounds:
10 sledgehammer strikes (5R, 5L)
100 ft farmer carry (50 ft down-back)
Rest 1 minute

Compare to 2022.07.04.

Option 4
1. 5 yoke carries @ 30 yd (15 yd downback) – work up to heaviest carry
2. 5 rounds of 5 reps on the axle “clean and press away” – work up to heavy set of 5

Compare to 2022.07.04.