Do This . . . NOT This: Lifting Etiquette
/
(This is a Blast from the Past article originally posted on 06/25/21.)
Discussing lifting etiquette may not be particularly exciting, but if you’ve ever received a bad hand-off on a bench press or had someone stand right in your line of sight on a press, you already know it’s important, so let’s briefly cover a few key points:
This . . . is NOT how a spotter performs a good hand-off.
Gentle hand-off on the bench press
If you’re spotting someone on the bench press, be smart, and be kind. Provide just enough assistance on the hand-off to help the lifter guide the bar into place over the shoulders, but don’t provide any more assistance than that. Too many spotters lift up too hard and ruin the lifter’s setup in the process.
“Working in” with another lifter
It is perfectly normal to share a bar, rack, and/or platform with another lifter (and it makes lifting more fun as well). If you lifted in high school or college, you’re already used to this, but this might be a new concept for those who started lifting later in life. For the squat or press, this situation tends to work best if the lifters are somewhat close in height (set the pins for the shorter partner as the taller partner can always get lower to unrack the bar), but pretty much everyone can bench with someone else, and this is certainly true for floor pulls like snatches, cleans, rows, and deadlifts as well - especially if there’s a deadlift jack available.
Not sure how to break the ice with another lifter? Just walk on up and say, “Can I work in with you, bro?”
Don’t coach someone else
Just don’t. It’s a bad idea. It’s all sorts of a bad idea.
This . . . is NOT the greatest place to stand while someone is pressing.
Get out da way
It’s ludacris to stand in the way of a lifter’s focal point, so don’t position yourself directly in a lifter’s line of sight if you can avoid it. This is not a big deal on most warm-ups, but it is rather important on work sets. If you’re about to walk by or are about to lift directly across from Bob, who’s performing his work sets of press, simply wait until he finishes the set, and then go about your life.
Brush the chalk off your bar
You use chalk when you lift because you have a brain, and due to this brain, you also probably realize that chalk absorbs moisture (which is why you use it). Because of this, you’ll always want to brush the chalk off of your barbell when you’re finished lifting to help prevent rust formation.
Put your equipment away
. . . or you owe the gym a dozen donuts . . . at least if you train with us at Testify. It should go without saying that you should put the equipment back where you found it (benches, barbells, weights, collars, etc.), but sometimes, it still needs to be said.
Wipe down your bench when you’re finished
Simply spray a rag or paper towel with whatever cleaner your gym uses and quickly wipe down the top surface of your bench. By doing so, you’ve ensured that no one else is subjected to the salty remnant of your sweaty backside.
(Some links may be affiliate links. As an Amazon Associate, Testify earns from qualifying purchases.)
If you found this helpful, you’ll love our weekly email. It’s got useful videos, articles, and training tips just like the one in this article. Sign up below, and of course, if you don’t love it, you can unsubscribe at any time.
At Testify, we offer small group training, private coaching (in-person or remotely via Zoom), online coaching, and form checks. Click the button below to get quality coaching from a Starting Strength Coach and start getting stronger TODAY.
Get Your FIRST Chin-up or Pull-up | 6 Ways to Success!
/Want to get your first chin-up or pull-up. We cover 6 ways to help you get it done.
At Testify, we offer small group training, private coaching (in-person or remotely via Zoom), online coaching, and form checks. Click the button below to get quality coaching from a Starting Strength Coach and start getting stronger TODAY.
5 WORST Breathing & Bracing Mistakes Lifters Don't Know They Are Making
/
You’re focused, you’re feeling strong, and you are totally ready for today’s PR squat attempt. Today is your day, bro. You are completely dialed in.
It’s too bad you breathe like a doofus when you lift.
What’s that? That ain’t you? You’re just reading for a friend? Whatever the case, let’s get to it. There are a few mistakes commonly seen when it comes to breathing and bracing correctly (i.e., performing the Valsalva maneuver) when lifting. Let’s take a look at them and fix them fast.
1. Breathing in on the descent and out on the ascent
This flashback-to-the-80s error is less pervasive than it used to be, but it’s still all too common. Remember - if the bar is moving, you’re not breathing.
Breath is support, and we like support when lifting heavy weights, so simply take a breath in before the start of the lift, hold that breath with tightly contracted abs (and the rest of your trunk) throughout the rep, and then exhale only when the bar is back where it started.
2. Holding your breath with puffed cheeks
When you perform the Valsalva maneuver, you hold your breath against a closed glottis, not against your lips with your cheeks puffed out. Don’t know what a glottis is? Not a problem, simply say the word “hick” and hold the “ck” position with your mouth at the end - you’ll be holding your breath against a closed glottis.
Correctly performing the Valsalva maneuver with an open or closed mouth, so to see if you’re doing it correctly (and not holding your breath against your lips), try performing the Valsalva maneuver with your mouth open the next time you lift.
3. Letting out your breath at the top of your deadlift
Just don’t. Remember - breath is support, and you’re still supporting the bar at the top of the pull. Wait the extra half second it takes to lower the bar and then release your breath when the bar is back on the floor where it started. This can be a hard habit to break for some, so practice it during the warm-ups when the weight is light.
4. Pushing your belly out into your belt
Nope. You get tight and rigid before starting a rep in the exact same manner whether or not you’re wearing a belt. Among other things, the belt provides a great tactile reminder of the need to contract the muscles of your midsection - you can feel your abs tense against the belt - but don’t try to actively shove your belly outward into the belt. Simply tense up like you’re going to take a punch to the gut, and you’ll be doing just fine.
5. Too many breaths between reps
This error usually shows up on the squat or the deadlift. The brief moment between reps provides a tiny respite before the next rep, but you waste energy if you spend more time in that position than you have to. The best resting position is that chair you’re going to sit on when you’re done with the last rep, so finish the rep, take a breath, and then start the next rep.
As you get deeper into the set - say rep 4 or 5 - you might need another breath or two, but try to keep it to a minimum. The “deadlift dry heaves” - where you spend too much time and take 5 or 6 breaths between reps - are all too common, and they exhaust you before you even start the next rep. Get the set done.
As always, we hope this helps you get stronger and live better.
If you found this helpful, you’ll love our weekly email. It’s got useful videos, articles, and training tips just like the one in this article. Sign up below, and of course, if you don’t love it, you can unsubscribe at any time.
At Testify, we offer small group training, private coaching (in-person or remotely via Zoom), online coaching, and form checks. Would you like to get quality coaching from a Starting Strength Coach?
Training When It's HOT: 11 Lifting Tips in 4 Minutes
/How to handle training when it's hot? Phil gives you 11 tips in less than 4 minutes.
At Testify, we offer small group training, private coaching (in-person or remotely via Zoom), online coaching, and form checks. Click the button below to get quality coaching from a Starting Strength Coach and start getting stronger TODAY.
Everything You Need to Know About Lifting Belts . . . QUICK!
/
Today’s topic is a quick dive into lifting belts - specifically, the four Ws of belts: width, when, where, and what. We covered how to efficiently and quickly put on your belt in another article about a month back, so feel free to click here to read that article or watch the associated videos.
Width
If you can get your back set in rigid and flat extension on the deadlift using a 4” belt (i.e., the belt is 4” wide), then go ahead and get a 4” belt. If you can’t, then you probably need to go with a 3” belt. It’s possible that you need a 2.5” belt, but 3” and 4” are the most common widths.
When
When should you put your belt on? A good rule of thumb is to put your belt on for your last warm-up set and then wear it for all of your work sets as well. Time and experience will help you decide if you want to eventually take a different approach, but this is a good guide to start with. I recommend taking your belt off (or at least loosening it) between sets.
Where
Where should you place your belt? You can start by centering it on your belly button as a rough guideline, but the most important landmarks are your hips and your ribs. The belt should sit between your hips and your ribs, and it’s the space between these two regions that will largely determine your choice of a 3” or a 4” belt. It’s worth noting that you especially do not want your belt running into your ribs. It makes for a memorable - and uncomfortable - experience.
What
What do you do once your belt is on? Take a big breath, hold that breath with tightly contracted abs (i.e., Valsalva maneuver), and then perform the lift (watch the video on breathing and bracing). Release your breath only after the rep is completed - remember that if the bar is moving, you’re not breathing.
Don’t complicate the breathing, and don’t try to push your belly out against the belt. Simply take a breath, hold it, tighten your abs as if you’re about to take a punch or as if you’re constipated, and then continue holding that breath throughout the entire rep. You can do this with either a closed mouth or an open mouth - you shouldn’t be holding your breath against your lips with puffed out cheeks. Instead, you hold your breath against a closed glottis, which is located in your throat. Say the word “hick” out loud and hold the “ck” sound at the end - that’s how you do it.
Need to Buy a Belt? Watch This First.
If you’re getting ready to buy a lifting belt, I’d recommend watching the included video here to get a good sense of what to look for when purchasing one. You’ll also find some links below to a few belts we recommend to our members.
Belts
My belt is from Best Belts, and I’d love to recommend them to you, but as of July 2023, they're backlogged and aren't taking orders, so with that in mind, here are the belt options we typically recommend:
As always, we hope this helps you get stronger and live better.
(Some links may be affiliate links. As an Amazon Associate, Testify earns from qualifying purchases.)