What is a Hang Clean? | Olympic Weightlifting Technique

What is a hang clean? How is it different from a power clean, hang power clean, or clean? As in our clean and power clean articles, let’s break this down simply and quickly, and for a demonstration with explanation, watch the included (and short) video.

Figure 1: the lift starts with the bar hanging in the hands (since “hang” is present).

“Hang” is Present
We begin by examining the words present or not present in the name of the lift.

The word “hang” is present, so the hang clean starts with the barbell hanging in the hands (Figure 1). Usually, the lift will start somewhere around the middle or lower part of the thigh, but you can also start a hang clean from a lower or higher position.

Again - and this is the important part - a hang clean simply starts with the bar hanging in the hands, and thus the lift does not start with the bar resting on the floor.

figure 2: THE LIFT IS RECEIVED IN A FULL DEPTH FRONT SQUAT (SINCE “POWER” AND “SPLIT” ARE NOT PRESENT).

No “Power” or “Split”
The words “power” and “split” are absent, so the lift will not be received in the power position (i.e., a partial depth front squat), nor will it be received in the split position (i.e., with one foot in front of the torso and one foot behind the torso). By default, this means the lift will be received in a full depth front squat (Figure 2).

So . . . What IS a Hang Clean?
Thus, a hang clean is a lift wherein the bar starts hanging in the hands and is then accelerated upward, imparting enough momentum to the bar that the bar continues upward, whereupon it is then racked (AKA “caught” or “received”) in a full depth front squat position before it is then stood up.

As always, we hope this helps you get stronger and live better.

(Some links may be affiliate links. As an Amazon Associate, Testify earns from qualifying purchases.)

If you found this helpful, you’ll love our weekly email. It’s got useful videos, articles, and training tips just like the one in this article. Sign up below, and of course, if you don’t love it, you can unsubscribe at any time.

---

At Testify, we offer small group training, private coaching (in-person or remotely via Zoom), online coaching, and form checks. Would you like to get quality coaching from a Starting Strength Coach?

You're Doing It Wrong! Cleans vs Hang Cleans vs Power Cleans!

Cleans, hang cleans, power cleans, hang power cleans . . . all in less than 3 minutes! What are the differences between these lifts, and how can we easily remember each one?

(This is a Blast from the Past video originally published on 02/19/22.)

---

At Testify, we offer small group training, private coaching (in-person or remotely via Zoom), online coaching, and form checks. Click the button below to get quality coaching from a Starting Strength Coach and start getting stronger TODAY.

Cleans vs Power Cleans vs Hang Cleans - What's the Difference?!

Cleans, hang cleans, power cleans, hang power cleans - what are the differences between these lifts, and how can we remember these differences in an easy and practical manner? To sort this out, we first need to understand two words - hang and power.

HANG
Hang refers to a starting position, so if you see the word hang, then you know the lift starts with the bar hanging in your hands. Common hang positions include the mid-thigh, low thigh, above the knee, below the knee, and even mid-shin, but most often (without any other specific qualifiers), hang typically refers to a start position at the mid to low thigh. 

Finally, note that if you don’t see the word hang, then you know the lift starts with the bar resting on the floor.

POWER
Power refers to a landing position (AKA receiving position), i.e., the position in which you catch or rack the bar. When you see the word power, simply think partial squat (tip: power and partial both start with the letter “p”). Thus, if you see the word power, you’re going to receive the clean in a partial depth squat (i.e., not a full depth squat). If you don’t see the word power, then you know you’re going to receive the clean in a full depth squat.

Now that you’ve got those two terms down, it’s time for the actual lifts . . 

CLEAN (AKA squat clean or full clean)
Since you don’t see the word hang, the bar starts on the floor, and since you don’t see the word power, it’s not received in a partial squat and is therefore received in a full depth front squat before being stood up. 

In summary, the clean starts with the bar on the floor, the bar is accelerated upward, it is received in a full depth front squat, and then the lifter recovers (i.e., stands up).

POWER CLEAN
You don’t see the word hang, so the bar starts on the floor, but you do see the word power, so the bar is received in a partial depth front squat.

In summary, the power clean starts with the bar on the floor, the bar is accelerated upward, it is received in a partial depth front squat, and then the lifter recovers.

HANG CLEAN
You see the word hang, so the bar starts hanging in the lifter’s hands, but you don’t see the word power, so the bar is received in a full depth front squat.

In summary, the hang clean starts with the bar hanging in the hands, the bar is accelerated upward, it is received in a full depth front squat, and then the lifter recovers.

HANG POWER CLEAN
Not surprisingly, this is a combination of both the power clean and the clean - the love child of both of those lifts. You see the word hang, so the bar starts hanging in the lifter’s hands, and you also see the word power, so the bar is received in a partial depth front squat.

In summary, the hang power clean starts with the bar hanging in the hands, the bar is accelerated upward, it is received in a partial depth front squat, and then the lifter recovers.

By knowing what hang and power mean - and knowing what it means when those words aren’t present - you’ll be able to consistently figure out these variations of the clean. As always, we hope this helps you get stronger and live better.

(Some links may be affiliate links. As an Amazon Associate, Testify earns from qualifying purchases.)

If you found this helpful, you’ll love our weekly email. It’s got useful videos, articles, and training tips just like the one in this article. Sign up below, and of course, if you don’t love it, you can unsubscribe at any time.

---

At Testify, we offer small group training, private coaching (in-person or remotely via Zoom), online coaching, and form checks. Would you like to get quality coaching from a Starting Strength Coach?

Stop Using Your Hands to Catch Your Cleans!

This is the correct way to rack a clean.

(A Blast from the Past article originally posted on 01/22/21)

The clean is racked (i.e., caught or received) on the shoulders. Not in the hands.

Figure 1: This is the correct way to rack a clean.

When you rack a clean, you do so by rapidly punching your elbows forward and up so that the barbell can sit on the shelf provided by your delts (Figure 1). This shelf is extremely strong, stable, and it can support a lot of weight - more than you can clean, in fact.

On the other hand - or rather, hands - if you receive your cleans by supporting the bar in your hands (Figure 2), your poor, tiny, bent wrists will hate you for it, and it’s possible that your collarbones will too.

Figure 2: Don’t rack your cleans like this. Your wrists will despise you.

To rack the bar properly, jam the elbows forward and up and receive the bar with a loose grip - be sure to let the thumb slip out of the hook grip as you punch the elbows forward.

Figure 3: Elbows forward and up and a loose grip on the bar

It’s possible that your pinky finger (maybe even your ring finger) will slip off the bar during the catch, and while this is not ideal (especially if you need to jerk the barbell overhead yet), it’s not the end of the world. Do whatever you need to do with your grip to permit the receiving of the bar on your shoulders.

Your wrists will not be straight when you catch a clean, and that’s perfectly fine. Whether a lifter receives the bar correctly on the shoulders or not, the wrists will be bent backwards in extension, but a bar caught on the shoulders (with elbows forward and up) is supported by the shoulders, so the wrists - although bent - do not take any of the load. A bar caught with low elbows, however, cannot be successfully supported by the shoulders and is instead supported on bent - and usually painful - wrists.

Tommy doesn’t even need hands to rack his cleans. (We do NOT recommend trying this at home, folks)

Be kind to your wrists and commit to catching your cleans on your shoulders. You’ll enjoy the lift far more when your wrists aren’t screaming at you.

As always, we hope this helps you get stronger and live better.

(Some links may be affiliate links. As an Amazon Associate, Testify earns from qualifying purchases.)

If you found this helpful, you’ll love our weekly email. It’s got useful videos, articles, and training tips just like the one in this article. Sign up below, and of course, if you don’t love it, you can unsubscribe at any time.

---

At Testify, we offer small group training, private coaching (in-person or remotely via Zoom), online coaching, and form checks. Interested in getting stronger, looking better, and having more energy?

Stop Using Your Hands to Catch Your Cleans!

The clean is racked (i.e., caught or received) on the shoulders. Not in the hands.

Figure 1: This is the correct way to rack a clean.

When you rack a clean, you do so by rapidly punching your elbows forward and up so that the barbell can sit on the shelf provided by your delts (Figure 1). This shelf is extremely strong, stable, and it can support a lot of weight - more than you can clean, in fact.

On the other hand - or rather, hands - if you receive your cleans by supporting the bar in your hands (Figure 2), your poor, tiny, bent wrists will hate you for it, and it’s possible that your collarbones will too.

Figure 2: Don’t rack your cleans like this. Your wrists will despise you.

To rack the bar properly, jam the elbows forward and up and receive the bar with a loose grip - be sure to let the thumb slip out of the hook grip as you punch the elbows forward.

Figure 3: Elbows forward and up and a loose grip on the bar

It’s possible that your pinky finger (maybe even your ring finger) will slip off the bar during the catch, and while this is not ideal (especially if you need to jerk the barbell overhead yet), it’s not the end of the world. Do whatever you need to do with your grip to permit the receiving of the bar on your shoulders.

Your wrists will not be straight when you catch a clean, and that’s perfectly fine. Whether a lifter receives the bar correctly on the shoulders or not, the wrists will be bent backwards in extension, but a bar caught on the shoulders (with elbows forward and up) is supported by the shoulders, so the wrists - although bent - do not take any of the load. A bar caught with low elbows, however, cannot be successfully supported by the shoulders and is instead supported on bent - and usually painful - wrists.

Tommy doesn’t even need hands to rack his cleans. (We do NOT recommend trying this at home, folks)

Be kind to your wrists and commit to catching your cleans on your shoulders. You’ll enjoy the lift far more when your wrists aren’t screaming at you.

As always, we hope this helps you get stronger and live better.

(Some links may be affiliate links. As an Amazon Associate, Testify earns from qualifying purchases.)

If you found this helpful, you’ll love our weekly email. It’s got useful videos, articles, and training tips just like the one in this article. Sign up below, and of course, if you don’t love it, you can unsubscribe at any time.

---

At Testify, we offer small group training, private coaching (in-person or remotely via Zoom), online coaching, and form checks. Interested in getting stronger, looking better, and having more energy?