The Best Way to Put On a Lifting Belt! (and a secret weapon!)
/Phil explains and demonstrates the best way to put on your lifting belt and also talks about what to do at powerlifting and strengthlifting competitions when this method might not be possible.
(This is a Blast from the Past video originally published on 01/15/22.)
At Testify, we offer small group training, private coaching (in-person or remotely via Zoom), online coaching, and form checks. Click the button below to get quality coaching from a Starting Strength Coach and start getting stronger TODAY.
Wrist Wraps: What, Why, When, and How!
/
(This is a Blast from the Past article originally posted on 07/09/21.)
If you’re new to lifting, you might have seen these things called wrist wraps, but you might not be sure what purpose they actually serve, so let’s chat.
What are wrist wraps?
Your basic wrist wrap consists of a thumb loop at one end, the elastic body of the wrap, and a hook-and-loop closure system (i.e., Velcro). Countless manufacturers sell wrist wraps with this basic structure - some common ones include Harbinger, SBD, Rogue, Schiek, and the list goes on. A very popular length of wrap is 18”, but you can find plenty of wraps that are both shorter or longer than this (longer is fine, but for most lifters, I wouldn’t recommend anything shorter than 18”). Some manufacturers (e.g., SBD) also make variations of their wraps that are either more rigid or more flexible depending on the lifter’s preference.
Why might I use wrist wraps?
You use wrists wraps when your wrists are in compression, i.e., when you’re pushing on something - not when you’re pulling on something. A wrap gives support to your wrist by acting as an external skeleton for your wrist - you can think of it as a cast or a lifting belt for your wrist. Since the wrap is wrapped around your wrist, it lends support to your wrist and makes it very difficult for the wrist to be in positions of extreme extension (i.e., positions where you wrist is bent very far backward). Lifts that benefit from wrists wraps include all the pressing movements (press, bench press, close grip bench, etc.), snatches, jerks, cleans (this is a gray area as you need your wrists to be in extension to rack a clean), and the squat for those who wrap their thumbs around the bar and have their wrists in extension. Even if you don’t normally use a wrist wrap, it’s probably a good idea to use one if you are dealing with and training through a wrist injury.
When might I use wrist wraps?
A reasonable approach is to treat your wrist wraps the same way you treat your belt - put the wraps on for your last warm-up set, and then use them for all of your work sets as well. With some experience under your belt (under your wraps?), you may decide to put them on earlier than your last warm-up, and that’s fine as well.
How do I use wrist wraps?
(Your best bet is to watch one of the videos included in this article, but the steps are listed below, and you can reference the photo sequence at the end of this article).
Place your thumb through the thumb loop so that the wrap drapes over the back of your wrist.
Position the body of the wrap so that it lies half on your forearm and half on your hand.
Apply tension and wrap the length of the wrap around your wrist until you reach the end of the wrap.
Close off the wrap by attaching it to itself using the Velcro strap.
Remove the thumb loop from your thumb (it is simply there to keep the wrap from spinning in place while you apply the wrap, so you no longer need it).
A wrist wrap worn too low on the arm . . . don’t do this.
Remember: this is not a forearm wrap or a hand wrap - it’s a wrist wrap, so be sure to pay attention to Step 2. If you position the wrap too low, it’s simply a forearm warmer, and if it’s too high, it’s just a weird glove. In effect, the wrap should almost lock those two sections of your arm together (i.e., the forearm and the hand), and to do so, it has to straddle both sections of your arm. If you put the wrap on correctly, it will make it harder to extend your wrist (i.e., bend it backwards), which means the wrap is doing its job of support.
Quick re-wrap solution - pinch the thumb loop between your thumb and index finger and use that setup to anchor the beginning of the wrap in place while you re-tighten the wrap.
The wrap should be very snug - not so tight that you start losing circulation in your hand, but pretty darn tight. It needs to be tight so it can provide support. You will always loosen or perhaps even remove the wraps between sets. If you only loosen the wrap between sets, you don’t need to re-insert your thumb in the thumb loop - a quicker solution is to simply pinch the thumb loop between your thumb and index finger and use that setup to anchor the beginning of the wrap in place while you re-tighten the wrap.
That pretty much wraps it up!
(Some links may be affiliate links. As an Amazon Associate, Testify earns from qualifying purchases.)
If you found this helpful, you’ll love our weekly email. It’s got useful videos, articles, and training tips just like the one in this article. Sign up below, and of course, if you don’t love it, you can unsubscribe at any time.
At Testify, we offer small group training, private coaching (in-person or remotely via Zoom), online coaching, and form checks. Click the button below to get quality coaching from a Starting Strength Coach and start getting stronger TODAY.
Step 1: Place your thumb through the thumb loop so that the wrap drapes over the back of your wrist.
Step 2: Position the body of the wrap so that it lies half on your forearm and half on your hand.
Step 3: Apply tension and wrap the length of the wrap around your wrist until you reach the end of the wrap.
Step 4: Close off the wrap by attaching it to itself using the Velcro strap.
Step 5: Remove the thumb loop from your thumb (it is simply there to keep the wrap from spinning in place while you apply the wrap, so you no longer need it).
The Super Secret Way to Put on Knee Sleeves!
/
(A Blast from the Past article originally posted on 08/13/21)
Oooh . . . secrets! We love us some secrets!
Not everyone knows this - and this is especially true if you’re a new lifter or at least new to using knee sleeves - but when it comes to putting on your knee sleeves, there is one method to rule them all. Anything else is a waste of your time and energy, so let’s take a look at how you should put on a sleeve (watch the included video for a quick demonstration):
Step 1: Turn the sleeve inside-out.
Step 2: Grab the sleeve with both hands so that it’s upside down and backward (i.e., the front of the sleeve - the part that will cover your kneecap - is facing backward).
Steps 1 & 2: The sleeve is inside-out, upside down, and backward . . . and this is a good thing.
Step 3: Before you put on your shoe, pull the sleeve over your foot until it comes up just past your ankle.
Step 3
Step 4: Spin the sleeve around so that it’s facing forward again (i.e., the front of the sleeve is facing forward).
Step 4
Step 5: Pull on the uppermost part of the sleeve - sliding the sleeve upward until it reaches a point a few inches below your knee. (If you like, you can perform step 5 before step 4.)
Step 5
Step 6: Grab the lowermost part of the sleeve (it’s actually the “top” of the sleeve, but it’s still upside down right now, remember?) and pull upward so that that portion of the sleeve starts sliding over the rest of the sleeve. As you continue doing this, the sleeve will be turning right-side-out again.
Step 6
Step 7: Feel free to make some minor adjustments, but really, at this point, you’re done.
Step 7 - done!
Now, go out and tell your friends because - after all - this is a secret that everyone kneeds to know.
If you’re looking for some knee sleeves, below are links to a few knee sleeve options that are popular with a number of our members at Testify:
As always, we hope this helps you get stronger and live better.
(Some links may be affiliate links. As an Amazon Associate, Testify earns from qualifying purchases.)
If you found this helpful, you’ll love our weekly email. It’s got useful videos, articles, and training tips just like the one in this article. Sign up below, and of course, if you don’t love it, you can unsubscribe at any time.
At Testify, we offer small group training, private coaching (in-person or remotely via Zoom), online coaching, and form checks. Would you like to get quality coaching from a Starting Strength Coach?
Knee Sleeves: What, Why, Where, and When!
/
(This is a Blast from the Past article originally posted on 07/16/21.)
What on earth are knee sleeves, and why might you want to wear them? Let’s chat.
What is a knee sleeve?
A knee sleeve is a sleeve . . . that goes on your knee. They are generally made of neoprene, and they should fit quite snugly. A reasonable approach is to make sure that they are snug, but not so snug that you need someone else to help you put them on. If they’re so tight that you need to take them off between sets, I’d recommend something a little less snug.
Why might you want knee sleeves?
The main reason is if you have the highly specific medical condition known as “cranky knees.” Now, if you have achy knees when you squat (and we’re generally talking about the squat here), there may be some technical considerations to examine as well as some programming considerations, and your coach can help you with that.
Nonetheless, to put it simply, knee sleeves simply help your knees feel better. They provide some warmth and some compression, and without getting into the weeds here, both of those factors generally make your knees more comfortable. It’s a nice, warm hug for your knees. One of our coaches, Mike, once accused me years ago of holding out on him because I evidently hadn’t suggested knee sleeves until a year or so into his training. Once he put them on, it was love at first squat.
Where can you get knee sleeves?
You can find some at your local sporting goods store, but your best bet is this thing they’ve developed called the internet, which they have on computers now. The usual suspects - Amazon, Rogue, etc. - will have a host of options, which brings us to . . .
What should you get?
5 mm and 7 mm are both common thicknesses, and having used both, I’d recommend the 7 mm option. There are a ton of companies that make them - some of the more popular ones are brands like Rehband, SBD, STrong (Mark Bell), Stoic, and Rogue.
There’s a big price range from about $35-$45 for a pair of sleeves to $35-$45 for a single sleeve (which reflects the prices of the brands listed above). The biggest difference seems to be simple longevity - the cheap ones tend to wear out and tear within a couple of years, whereas the pricier ones typically last quite a bit longer - to the point that I’d probably say you’ll spend less money in the long run by going with the more expensive pairs. Of course, your mileage may vary.
Below are links to a few knee sleeve options that are popular with a number of our members at Testify:
When do you use knee sleeves?
The short answer is - squats and Olympic lifting. You’ll appreciate them for squatting, and you’ll appreciate them for the Olympic lifts because of the squatting involved in both snatching and cleaning (there is probably some benefit for the impact of landing as well).
What about using them on the press and bench press? Go ahead if you’d like - they won’t help, but they won’t hurt either.
The deadlift gets a little more discussion. In the deadlift, the knee doesn’t go through a large range of motion (as opposed to the knee’s longer ROM in the squat), so if your knees ache while squatting, but they feel fine while deadlifting, I’d recommend not wearing sleeves. The thickness of the sleeve - while not huge - is still one more thing you have to deal with when trying to keep the bar close on the pull, so if you don’t need them, don’t use them. But if your knees also ache on the deadlift, and you find that the sleeves help, then go right ahead.
As always, we hope this helps you get stronger and live better!
(Some links may be affiliate links. As an Amazon Associate, Testify earns from qualifying purchases.)