Lifting Belts | Width, When, Where, and What!
/Phil covers the 4 Ws of lifting belts: width of belts, when to use a belt, where to wear your belt, and what to do once the belt is on.
(This is a Blast from the Past video originally published on 01/22/22.)
At Testify, we offer small group training, private coaching (in-person or remotely via Zoom), online coaching, and form checks. Click the button below to get quality coaching from a Starting Strength Coach and start getting stronger TODAY.
Barbell Rings - What Are These Things For?!
/
(This is a Blast from the Past article originally posted on 08/27/21.)
Every barbell has one or two pairs of rings - also known as score marks or knurl marks. Today, we’re going to talk about the two types of rings, the purpose of the rings, and how they might pose a problem for a new or inexperienced lifter.
For further explanation and demonstration of the topics covered in this article, be sure to check out any of the included videos.
From top to bottom - barbells with (A) power rings only, (B) weightlifting and powerlifting rings, and (C) weightlifting rings only
The 2 Types of Rings
Using a dual-ringed bar (i.e., a bar with both sets of rings) for reference, the inner rings are known as the powerlifting rings or simply the power rings, and these marks are 81 cm apart (approximately 32 in). The outer rings are known as the weightlifting rings or the olympic rings, and these marks are 91 cm apart (approximately 36 in).
Purpose
Both sets of rings are used for reference points when you take your grip on the bar. In the sport of powerlifting, the power rings on a dedicated powerlifting barbell (or “power bar”) represent the maximum legal grip width for the bench press (i.e., at the widest legal grip, the index fingers still need to be in contact with the rings). In lifts other than the bench press (e.g., the squat) the rings still serve as a reference point upon which to base your grip.
In the sport of weightlifting - i.e., the snatch and clean-and-jerk - due to the wider grip widths used in the clean, the jerk, and specifically the snatch, it is useful to have a wider set of rings for reference, and thus, the weightlifting rings are set a bit wider than the power rings.
The Problem
A potential problem arises when a lifter switches from one barbell to a different barbell. Suppose, for example, that Jack is accustomed to training on a bar that only has one set of rings, and then he travels somewhere and ends up using a dual-ringed bar. Suddenly, Jack’s not sure which set he should be using for his reference point for his grip.
Conversely, let’s say Jill has been training with a dual-ringed bar, and then she goes to her first competition, and the competition bar only has one set of rings. As Jill steps onto the competition platform, she isn’t sure whether she’s looking at the power rings or the weightlifting rings.
The solution here is pretty simple - know your equipment. If you’re not sure which rings you’ve been using, you can easily figure it out. If it’s a dual-ringed bar, you hopefully already know whether you’ve been using the inner set or outer set, and if it's a single-ringed bar, break out your tape measure and check the distance between the rings (32 inches = powerlifting rings and 36 inches = weightlifting rings).
If you have to go train or compete on a different bar, know the following points:
At a powerlifting meet, you’ll either encounter a power bar (i.e., a bar with power rings) or a bar with both sets of rings (less common at a meet).
At a weightlifting meet, you’ll either encounter a weightlifting bar (i.e., a bar with weightlifting rings) or a bar with both sets of rings (again, less common at a meet).
In general training, if you encounter a single-ringed bar, you’re probably - probably - looking at the power rings as these bars are far more common than dedicated weightlifting bars.
While the above points are useful, your best bet is to still measure.
Knowing these facts, you can keep your technique reproducible and therefore consistent wherever you go.
As always, we hope this helps you get stronger and live better.
-Phil
PS: Whenever you want even more Testify in your life, here are some free resources:
Follow Testify on Instagram HERE.
Subscribe to Testify’s YouTube channel HERE.
Book a free intro and strategy session with us HERE.
Pick up a free copy of Testify’s Squat Guide: 12 Tips to Improve Your Squat Now HERE.
Get our free weekly email - containing useful videos, articles, and training tips - HERE.
(Some links may be affiliate links. As an Amazon Associate, Testify earns from qualifying purchases.)
At Testify, we offer small group training, private coaching (in-person or remotely via Zoom), online coaching, and form checks. Interested in getting stronger, looking better, and having more energy?
How to Build Pulling Blocks | Easy DIY Deadlift Blocks
/Need some easy-to-make pulling blocks for deficit deadlifts, block pulls, benching, or even a makeshift deadlift platform? We've got you covered.
At Testify, we offer small group training, private coaching (in-person or remotely via Zoom), online coaching, and form checks. Click the button below to get quality coaching from a Starting Strength Coach and start getting stronger TODAY.
The Best Way to Put On a Lifting Belt! (and a secret weapon!)
/Phil explains and demonstrates the best way to put on your lifting belt and also talks about what to do at powerlifting and strengthlifting competitions when this method might not be possible.
(This is a Blast from the Past video originally published on 01/15/22.)
At Testify, we offer small group training, private coaching (in-person or remotely via Zoom), online coaching, and form checks. Click the button below to get quality coaching from a Starting Strength Coach and start getting stronger TODAY.
Wrist Wraps: What, Why, When, and How!
/
(This is a Blast from the Past article originally posted on 07/09/21.)
If you’re new to lifting, you might have seen these things called wrist wraps, but you might not be sure what purpose they actually serve, so let’s chat.
What are wrist wraps?
Your basic wrist wrap consists of a thumb loop at one end, the elastic body of the wrap, and a hook-and-loop closure system (i.e., Velcro). Countless manufacturers sell wrist wraps with this basic structure - some common ones include Harbinger, SBD, Rogue, Schiek, and the list goes on. A very popular length of wrap is 18”, but you can find plenty of wraps that are both shorter or longer than this (longer is fine, but for most lifters, I wouldn’t recommend anything shorter than 18”). Some manufacturers (e.g., SBD) also make variations of their wraps that are either more rigid or more flexible depending on the lifter’s preference.
Why might I use wrist wraps?
You use wrists wraps when your wrists are in compression, i.e., when you’re pushing on something - not when you’re pulling on something. A wrap gives support to your wrist by acting as an external skeleton for your wrist - you can think of it as a cast or a lifting belt for your wrist. Since the wrap is wrapped around your wrist, it lends support to your wrist and makes it very difficult for the wrist to be in positions of extreme extension (i.e., positions where you wrist is bent very far backward). Lifts that benefit from wrists wraps include all the pressing movements (press, bench press, close grip bench, etc.), snatches, jerks, cleans (this is a gray area as you need your wrists to be in extension to rack a clean), and the squat for those who wrap their thumbs around the bar and have their wrists in extension. Even if you don’t normally use a wrist wrap, it’s probably a good idea to use one if you are dealing with and training through a wrist injury.
When might I use wrist wraps?
A reasonable approach is to treat your wrist wraps the same way you treat your belt - put the wraps on for your last warm-up set, and then use them for all of your work sets as well. With some experience under your belt (under your wraps?), you may decide to put them on earlier than your last warm-up, and that’s fine as well.
How do I use wrist wraps?
(Your best bet is to watch one of the videos included in this article, but the steps are listed below, and you can reference the photo sequence at the end of this article).
Place your thumb through the thumb loop so that the wrap drapes over the back of your wrist.
Position the body of the wrap so that it lies half on your forearm and half on your hand.
Apply tension and wrap the length of the wrap around your wrist until you reach the end of the wrap.
Close off the wrap by attaching it to itself using the Velcro strap.
Remove the thumb loop from your thumb (it is simply there to keep the wrap from spinning in place while you apply the wrap, so you no longer need it).
A wrist wrap worn too low on the arm . . . don’t do this.
Remember: this is not a forearm wrap or a hand wrap - it’s a wrist wrap, so be sure to pay attention to Step 2. If you position the wrap too low, it’s simply a forearm warmer, and if it’s too high, it’s just a weird glove. In effect, the wrap should almost lock those two sections of your arm together (i.e., the forearm and the hand), and to do so, it has to straddle both sections of your arm. If you put the wrap on correctly, it will make it harder to extend your wrist (i.e., bend it backwards), which means the wrap is doing its job of support.
Quick re-wrap solution - pinch the thumb loop between your thumb and index finger and use that setup to anchor the beginning of the wrap in place while you re-tighten the wrap.
The wrap should be very snug - not so tight that you start losing circulation in your hand, but pretty darn tight. It needs to be tight so it can provide support. You will always loosen or perhaps even remove the wraps between sets. If you only loosen the wrap between sets, you don’t need to re-insert your thumb in the thumb loop - a quicker solution is to simply pinch the thumb loop between your thumb and index finger and use that setup to anchor the beginning of the wrap in place while you re-tighten the wrap.
That pretty much wraps it up!
(Some links may be affiliate links. As an Amazon Associate, Testify earns from qualifying purchases.)
If you found this helpful, you’ll love our weekly email. It’s got useful videos, articles, and training tips just like the one in this article. Sign up below, and of course, if you don’t love it, you can unsubscribe at any time.
At Testify, we offer small group training, private coaching (in-person or remotely via Zoom), online coaching, and form checks. Click the button below to get quality coaching from a Starting Strength Coach and start getting stronger TODAY.
Step 1: Place your thumb through the thumb loop so that the wrap drapes over the back of your wrist.
Step 2: Position the body of the wrap so that it lies half on your forearm and half on your hand.
Step 3: Apply tension and wrap the length of the wrap around your wrist until you reach the end of the wrap.
Step 4: Close off the wrap by attaching it to itself using the Velcro strap.
Step 5: Remove the thumb loop from your thumb (it is simply there to keep the wrap from spinning in place while you apply the wrap, so you no longer need it).