Bench Press with Short Legs or Back Pain?

(A Blast from the Past article originally posted on 11/26/21)

If you have shorter legs you may find it difficult or simply uncomfortable to keep your feet planted firmly (and flat) on the ground. Let’s fix this.

Having your feet planted flat and firmly to the floor is important because your feet provide lateral stability, i.e., your stance provides side-to-side stability during the bench press because the bench itself is rather narrow. Additionally, having your feet planted firmly on the ground allows you to use your legs to drive up the bench during the movement as well (which provides rigidity in your upper body and also reinforces your arch).

With all this in mind, if you have shorter legs - specifically shorter lower legs (i.e., your shins or shanks) - and if you find that your heels are coming up off the ground, then simply stack a bumper plate or two underneath each foot.

You can use wooden blocks or rubber mats instead of bumper plates, but whatever you use, your new “foot platform” needs to provide a non-slip surface that is high enough that you can keep your feet flat and firmly on that surface. A reasonable benchmark (get it?) is to create a platform high enough that your thighs are roughly parallel to the ground.

The use of such a platform can also be a good tactic if you experience some low back discomfort or pain when you lie down on the bench. This can occur with people with shorter legs due to the excessive arch needed to reach their feet down to the floor, and it can also occur with older people or with people who carry some extra weight.

Jen demonstrates the use of bumper plates to provide an elevated platform for her feet.

If lying down on the bench causes you some discomfort, try raising your feet up a bit by using a platform. If your use of the platform is due to discomfort (and not due to having short legs), you may find that you can reduce the height of your platform over time (e.g., remove a bumper plate from your stack), and you might even get to the point where your feet are flat on the ground again.

We hope this helps you get stronger and live better!

(Some links may be affiliate links. As an Amazon Associate, Testify earns from qualifying purchases.)

If you found this helpful, you’ll love our weekly email. It’s got useful videos, articles, and training tips just like the one in this article. Sign up below, and of course, if you don’t love it, you can unsubscribe at any time.


At Testify, we offer small group training, private coaching (in-person or remotely via Zoom), online coaching, and form checks. Would you like to get quality coaching from a Starting Strength Coach?

How to Unrack a Heavy Bench Press By Yourself

Struggling with unracking your bench press when training alone? Take the strain off your shoulders (and avoid getting a barbell to the face!) with this method.


At Testify, we offer small group training, private coaching (in-person or remotely via Zoom), online coaching, and form checks. Click the button below to get quality coaching from a Starting Strength Coach and start getting stronger TODAY.

Use This Grip for a BIGGER Bench Press and Press!

Want a bigger bench? A bigger press? Of course you do. Let’s get right to it.

figure 1: Compression grip (bench press configuration)

This article is the first in our short series on the correct grip for each lift - from pushing movements like a bench press or a press to pulling movements like a deadlift or a row, and we’ll also discuss the differences that come into play when you have an Olympic movement like a snatch or clean.

Today’s Topic: Pushing Movements
The grip we are covering today is the type of grip you would take for the bench press (Figure 1), the press, the incline bench press, the close grip bench press, etc. This grip is commonly referred to as a compression grip.

An important concept to remember is that - and this is true for both pushing and pulling movements - gravity alway wants objects to move downward.

This includes the barbell that’s in your hands, so when you’re pushing on the bar, you don’t want to put the bar in a position that permits the bar to accidentally reach a lower position (in your hands) than the position it’s already occupying. In other words, make sure that the bar is in the lowest, stable position you can achieve . . . right from the start.

figure 2: Do not put the bar up here.

What NOT To Do
For example, when you unrack the press, don’t support the barbell up high in the hand (Figure 2). If you do this with a heavy weight, it’s simply going to bend your wrist backward (thus lowering the bar). As a result, your flimsy, little, dainty, baby wrists are in a rather unstable position of extreme extension (Figure 3).

You’ve created an energy leak, and this is not a productive position from which to press or bench heavy weights. What to do?

figure 3: wrists in extreme extension - don’t be like this fool.

Figure 4

The Answer
Before unracking either the press or the bench, get the bar sitting over the base of the palms - not up by the base of your fingers, but at the base of your actual hand (Figure 4).

This position permits the bar to be stacked right over the bones of the forearms, which is excellent for force transfer.

From here, pronate your grip just enough that your thumbs can grip the bar (Figure 5). This positions the thumbs so that they can wrap around the bar in the opposite direction of the rest of your fingers.

Squeeze the bar tightly, and that’s it - this is your grip (Figure 6).

figure 5: pronate the grip slightly until the thumbs are below the bar.

The Result
This grip permits the bar to sit deep in the base of your palm - whether you’re benching or pressing. Your wrists are as straight as they can be, although they won’t be entirely straight - let’s call it a neutral position.

As a side not, wrist wraps can help achieve and maintain this position, but they shouldn’t be a crutch - learn to achieve the correct position without wraps, and then start using wraps as your work weights get heavier.

Figure 6: squeeze the bar tightly.

The wrists certainly are no longer bent back in extreme extension, and they also aren’t so straight that it feels like the bar is pushing down on the webbing of your thumb.

As previously mentioned, the bar is now positioned right over the bones of the forearm (Figure 7), which makes for efficient force transfer between your arms, hands, and the bar, and this makes for a stronger press or bench press.

figure 7: compression grip (press width)

Next up - the tension grip.

As always, we hope these tips help you get stronger and live better.

(Some links may be affiliate links. As an Amazon Associate, Testify earns from qualifying purchases.)

If you found this helpful, you’ll love our weekly email. It’s got useful videos, articles, and training tips just like the one in this article. Sign up below, and of course, if you don’t love it, you can unsubscribe at any time.


At Testify, we offer small group training, private coaching (in-person or remotely via Zoom), online coaching, and form checks. Would you like to get quality coaching from a Starting Strength Coach?

Bench Press: He Should NOT Have Done This...

Phil addresses and helps you fix a common bench press error in this episode of our Two Minute Tactics.


At Testify, we offer small group training, private coaching (in-person or remotely via Zoom), online coaching, and form checks. Click the button below to get quality coaching from a Starting Strength Coach and start getting stronger TODAY.

Ain't Nothing Worse than a Slippery Bench!

Braveheart meme2.jpeg

(This is a Blast from the Past article originally posted on 09/24/21.)

If you’re dealing with a bench that has a slippery surface, this is a situation that needs to be remedied.

We use our legs on the bench press as they provide lateral stability and support our arch, but we can only effectively drive up the bench with our legs if our shoulders are firmly pinned to the bench itself. In other words, sliding up the bench is not what we want, so if you’re training on a bench that’s a bit slick, this is a problem. Below are a few solutions, and if you don’t feel like reading, you can watch our videos on this topic instead.

Figure 1

Figure 1

Option 1
Take a couple of strength bands (AKA resistance bands) and place one (lengthwise) around each side of the bench as shown in Figure 1. The bands will stick to the bench quite nicely, and you, in turn, will stick to the bands quite nicely. Since many commercial gyms have these bands, this can be a handy solution if you’re training at a commercial gym while traveling.

Figure 2

Figure 2

Option 2
Find and buy a non-slip rug pad (or non-slip shelf liner). A 2 ft x 4 ft section should be more than sufficient, and you can get something in this size for under $10. Simply place the rug pad on the bench as shown in Figure 2, and you now have a very grippy bench on which to train.

This is probably my favorite option as it’s flexible, rolls up easily and compactly, and is therefore easy to bring with you in your training bag.

Option 3
If Options 1 and 2 aren’t available for whatever reason, you can substitute a yoga mat for the rug pad listed in Option 2. Most commercial gyms have something like this lying around. It will be a bit on the wide side, but it will usually get the job done.

Option 4
There are a few companies out there that manufacture shirts with grippy sections of material. These are designed to help keep the bar secure on your back when squatting as well as keep you in place on the bench when benching. A7 is one such company, but you can simply google “bench grip shirt” or “bar grip shirt” to find other options. I don’t have any personal experience with these types of shirts, but I’ve heard excellent reviews from those I know who train with them.

As always, we hope this helps you get stronger and live better!

(Some links may be affiliate links. As an Amazon Associate, Testify earns from qualifying purchases.)

If you found this helpful, you’ll love our weekly email. It’s got useful videos, articles, and training tips just like the one in this article. Sign up below, and of course, if you don’t love it, you can unsubscribe at any time.


At Testify, we offer small group training, private coaching (in-person or remotely via Zoom), online coaching, and form checks. Would you like to get quality coaching from a Starting Strength Coach?

How to Safely Bench Press Alone!

If you need to bench press alone, you need to do it safely, and it's very simple. Phil breaks it down in under 3 minutes.

(This is a Blast from the Past video originally published on 01/29/22.)


At Testify, we offer small group training, private coaching (in-person or remotely via Zoom), online coaching, and form checks. Click the button below to get quality coaching from a Starting Strength Coach and start getting stronger TODAY.