Use This Grip for a BIGGER Bench Press and Press!
/
Want a bigger bench? A bigger press? Of course you do. Let’s get right to it.
figure 1: Compression grip (bench press configuration)
This article is the first in our short series on the correct grip for each lift - from pushing movements like a bench press or a press to pulling movements like a deadlift or a row, and we’ll also discuss the differences that come into play when you have an Olympic movement like a snatch or clean.
Today’s Topic: Pushing Movements
The grip we are covering today is the type of grip you would take for the bench press (Figure 1), the press, the incline bench press, the close grip bench press, etc. This grip is commonly referred to as a compression grip.
An important concept to remember is that - and this is true for both pushing and pulling movements - gravity alway wants objects to move downward.
This includes the barbell that’s in your hands, so when you’re pushing on the bar, you don’t want to put the bar in a position that permits the bar to accidentally reach a lower position (in your hands) than the position it’s already occupying. In other words, make sure that the bar is in the lowest, stable position you can achieve . . . right from the start.
figure 2: Do not put the bar up here.
What NOT To Do
For example, when you unrack the press, don’t support the barbell up high in the hand (Figure 2). If you do this with a heavy weight, it’s simply going to bend your wrist backward (thus lowering the bar). As a result, your flimsy, little, dainty, baby wrists are in a rather unstable position of extreme extension (Figure 3).
You’ve created an energy leak, and this is not a productive position from which to press or bench heavy weights. What to do?
figure 3: wrists in extreme extension - don’t be like this fool.
Figure 4
The Answer
Before unracking either the press or the bench, get the bar sitting over the base of the palms - not up by the base of your fingers, but at the base of your actual hand (Figure 4).
This position permits the bar to be stacked right over the bones of the forearms, which is excellent for force transfer.
From here, pronate your grip just enough that your thumbs can grip the bar (Figure 5). This positions the thumbs so that they can wrap around the bar in the opposite direction of the rest of your fingers.
Squeeze the bar tightly, and that’s it - this is your grip (Figure 6).
figure 5: pronate the grip slightly until the thumbs are below the bar.
The Result
This grip permits the bar to sit deep in the base of your palm - whether you’re benching or pressing. Your wrists are as straight as they can be, although they won’t be entirely straight - let’s call it a neutral position.
As a side not, wrist wraps can help achieve and maintain this position, but they shouldn’t be a crutch - learn to achieve the correct position without wraps, and then start using wraps as your work weights get heavier.
Figure 6: squeeze the bar tightly.
The wrists certainly are no longer bent back in extreme extension, and they also aren’t so straight that it feels like the bar is pushing down on the webbing of your thumb.
As previously mentioned, the bar is now positioned right over the bones of the forearm (Figure 7), which makes for efficient force transfer between your arms, hands, and the bar, and this makes for a stronger press or bench press.
figure 7: compression grip (press width)
Next up - the tension grip.
As always, we hope these tips help you get stronger and live better.
(Some links may be affiliate links. As an Amazon Associate, Testify earns from qualifying purchases.)
If you found this helpful, you’ll love our weekly email. It’s got useful videos, articles, and training tips just like the one in this article. Sign up below, and of course, if you don’t love it, you can unsubscribe at any time.
At Testify, we offer small group training, private coaching (in-person or remotely via Zoom), online coaching, and form checks. Would you like to get quality coaching from a Starting Strength Coach?
Bench Press: He Should NOT Have Done This...
/Phil addresses and helps you fix a common bench press error in this episode of our Two Minute Tactics.
At Testify, we offer small group training, private coaching (in-person or remotely via Zoom), online coaching, and form checks. Click the button below to get quality coaching from a Starting Strength Coach and start getting stronger TODAY.
Ain't Nothing Worse than a Slippery Bench!
/
(This is a Blast from the Past article originally posted on 09/24/21.)
If you’re dealing with a bench that has a slippery surface, this is a situation that needs to be remedied.
We use our legs on the bench press as they provide lateral stability and support our arch, but we can only effectively drive up the bench with our legs if our shoulders are firmly pinned to the bench itself. In other words, sliding up the bench is not what we want, so if you’re training on a bench that’s a bit slick, this is a problem. Below are a few solutions, and if you don’t feel like reading, you can watch our videos on this topic instead.
Figure 1
Option 1
Take a couple of strength bands (AKA resistance bands) and place one (lengthwise) around each side of the bench as shown in Figure 1. The bands will stick to the bench quite nicely, and you, in turn, will stick to the bands quite nicely. Since many commercial gyms have these bands, this can be a handy solution if you’re training at a commercial gym while traveling.
Figure 2
Option 2
Find and buy a non-slip rug pad (or non-slip shelf liner). A 2 ft x 4 ft section should be more than sufficient, and you can get something in this size for under $10. Simply place the rug pad on the bench as shown in Figure 2, and you now have a very grippy bench on which to train.
This is probably my favorite option as it’s flexible, rolls up easily and compactly, and is therefore easy to bring with you in your training bag.
Option 3
If Options 1 and 2 aren’t available for whatever reason, you can substitute a yoga mat for the rug pad listed in Option 2. Most commercial gyms have something like this lying around. It will be a bit on the wide side, but it will usually get the job done.
Option 4
There are a few companies out there that manufacture shirts with grippy sections of material. These are designed to help keep the bar secure on your back when squatting as well as keep you in place on the bench when benching. A7 is one such company, but you can simply google “bench grip shirt” or “bar grip shirt” to find other options. I don’t have any personal experience with these types of shirts, but I’ve heard excellent reviews from those I know who train with them.
As always, we hope this helps you get stronger and live better!
(Some links may be affiliate links. As an Amazon Associate, Testify earns from qualifying purchases.)