Week 2021.05.17

/

This Week’s Conditioning

Option 1
”Prowler Base+1”
1. Load up a manageable weight.
2. Sprint 40m at 85% intensity.
3. Rest 30 sec.
4. Repeat 5-15 times.

Courtesy of “Death by Prowler” (on Starting Strength).

Compare to 2021.03.15.

Option 2
Bike/row:
4 x 800m

Rest 3 minutes between each round. Score = slowest time.

Compare to 2021.02.22.

Option 3
Outdoors:
5-10 rounds:
10 sledgehammer strikes (5R, 5L)
50 yd farmer carry (25 yd down-back)
Rest 1 minute

Indoors:
5-10 rounds:
10 sledgehammer strikes (5R, 5L)
100 ft farmer carry (50 ft down-back)

Rest 1 minute

Compare to 2021.01.25.

Option 4
5-8 rounds:
50 ft sled push
50 ft sled pull (hand over hand)
Row 1 minute
Rest 1 minute

This can also be done in a group of three where the sledder determines how long the other two people row and rest.

Compare to 2021.01.18.

Barbell Sports

/
IMG_6792.JPG

(A Blast from the Past article originally posted on 11/20/18.)

“What’s the deal with all of these lifting sports? I can’t keep them straight!”

No worries - let’s take a quick look at the three major sports of the barbell world.

  • Powerlifting: This is the sport of the back squat, bench press, and the deadlift. Each lifter gets 3 attempts on the squat, 3 attempts on the bench press, and 3 attempts on the deadlift. Take your best attempt from each lift, add them together, and you have what is known as your total.

  • Strengthlifting: This is the sport of the back squat, the press, and the deadlift. It is similar to powerlifting, but there are several notable differences:

    • The press (i.e., overhead press) is contested, not the bench press.

    • The deadlift is conventional, which means your hands go outside of your legs. This is how we teach the deadlift anyway, so it’s not unusual to you, but at powerlifting meets, a beast known as the sumo deadlift often makes an appearance (wherein the stance is very wide and the grip is fairly narrow - inside the stance).

    • The judges simply tell you whether or not the lift counted, whereas in powerlifting, the judges are a bit more involved.

  • Weightlifting: This is the sport of the snatch and the clean-and-jerk. Like the other two sports, each lifter gets 3 attempts on each of the lifts, and once again, we add the best successful lifts together to get a total.

    • Weightlifting is also known as “olympic weightlifting” or simply “olympic lifting.”

    • If you’ve ever watched lifting during the Summer Olympics, this is the sport you witnessed.

Week 2021.05.10

/

The annual Testify Barbell MAYhem was a great success this weekend, and we are hugely thankful to everyone who helped out! Loaders, referees, table officials, those who helped setup and tear down - we could not have hosted this meet without you all!

This Week’s Conditioning

Option 1
“Prowler Base”
1. Load up a manageable weight.
2. Sprint 40m at 85% intensity.
3. Rest until breathing and heart rate slow down. (45 sec – 2 min)
4. Repeat 5-15 times.

Courtesy of “Death by Prowler” (on Starting Strength).

Compare to 2021.03.08.

Option 2
Bike/row:
4 x 3 minutes

Rest 3 minutes between each round. Score = lowest distance.

Compare to 2021.02.15.

Option 3
5-10 rounds of:
30 sec ME tire flips
30 sec rest

Compare to 2021.01.18.

Option 4
1. 5 yoke carries @ 30 yd (15 yd downback) – work up to heaviest carry
2. 5 rounds of 5 reps on the axle “clean and press away” – work up to heavy set of 5

Compare to 2021.01.11.

Squatting Deeper - Don't Make These 2 Mistakes!

/
Julie hits depth on a correctly executed squat.

Julie hits depth on a correctly executed squat.

When people are endeavoring to squat deeper - whether because their coach told them too or because they’ve recorded themselves on video and seen the disheartening proof of a “too-high” squat - we often see two mistakes:

  1. The lifter descends significantly faster than before without actually squatting deeper.

  2. The lifter leans over too much.

With regard to mistake #1, remember that going deeper doesn’t mean descending faster. In fact, 50% of the time, going down faster doesn’t change anything except the speed of the descent (yes, duh) and the other 50% of the time, the lifter actually cuts off his squat even higher when he tries to descend more quickly.

Julie makes mistake #2 as she leans over too much in an effort to achieve the proper depth. Note that the crease of her hips have not passed below the level of the top of her kneecap and are, in fact, well above height of the kneecap.

Julie makes mistake #2 as she leans over too much in an effort to achieve the proper depth. Note that the crease of her hips have not passed below the level of the top of her kneecap and are, in fact, well above height of the kneecap.

Mistake #2 - leaning over too much - comes from a misunderstanding of how depth is achieved. Depth is achieved when the crease of the hip passes just below the height of the top of the patella. In other words, you squat deeper by taking the hips lower - not by taking the bar lower. If the hips go lower, everything else above the hips goes lower as well - including the bar - but the reverse is not necessarily true. When starting your descent, leaning over (as you shove your knees out and reach back with your hips) is important, but once you’ve set your back angle by doing so, keep it constant - don’t lean over more than you already have.

If you struggle with either of these two mistakes, try the cues “stretch deep” or “reach deep” the next time you squat. With the “stretch deep” cue, you are reminding yourself that you will experience a stretch in the hips as you descend lower into the squat, and with the “reach deep” cue, you are reminding yourself that you reach downward with your hips - not the bar.

“Stretch deep” and “reach deep” - give these cues a try, and we hope they help you out!

Week 2021.05.03

/

Reminder: Please note that the gym will be closed this Saturday, 05/08/21, as we are hosting the annual Testify Barbell MAYhem weightlifting meet.

This Week’s Conditioning

Option 1
Sled
Outdoors:
10-20 x 25 yds EMOM at a weight of your choice

Every minute, push the sled 25 yards, i.e., if pushing the sled takes 20 seconds, then you have 40 seconds to rest. Perform 10-20 rounds.

Indoors:
10-20 x 100 ft EMOM at a weight of your choice

Every minute, push the sled 100 feet, i.e., if pushing the sled takes 20 seconds, then you have 40 seconds to rest. Perform 10-20 rounds.

Compare to 2021.03.01.

Option 2
Bike/row:
5 min on
4 min off
4 min on
3 min off
3 min on
2 min off
2 min on
1 min off
1 min on

Record distance for each interval and add for total distance.

Compare to 2021.02.08.

Option 3
Outdoors:
5-10 rounds:
50 yd sled push (25 yd down-back)
50 yd farmer carry (25 yd down-back)
Rest 1 min

Indoors:
5-10 rounds:
100 ft sled push (50 ft down-back)
100 ft farmer carry (50 ft down-back)
Rest 1 min

Compare to 2021.01.11.

Option 4
10 x 50 ft farmer carry
Each carry is 25 ft down and 25 ft back and is for time. Rest 1 minute between carries.

Women: 97# per handle (80# of plates)
Men: 137# per handle (120# of plates)
(Note: Each handle weighs 17#.)

Compare to 2021.01.04.

Bench Press Cue: Pull Your Fists Back!

/
Joy’s arms are straight, but notice the position of her fists in the picture on the left versus the position of her fists in the picture on the right (i.e., with shoulders retracted).

Joy’s arms are straight, but notice the position of her fists in the picture on the left versus the position of her fists in the picture on the right (i.e., with shoulders retracted).

When we set up to bench press, we retract our shoulder blades before we start the movement. We do so as this process creates more stability (i.e., it creates a wider base of support on the bench itself) and puts us in a stronger and more efficient position from which to bench. It also has the added bonus of reducing the distance the bar has to travel throughout the lift.

However, lifters occasionally have a bit of trouble pulling their shoulders back into the proper position. Sometimes this is due to a lack of understanding of what this position looks and feels like, and sometimes it’s simply an inability to exert conscious control over something they can’t see. Either way, if you struggle to retract your shoulders blades, try cueing yourself to pull your fists back instead.

Compare the height of the barbell in the photo on the left (incorrect: fists not pulled back) with the height of the barbell in the photo on the right (correct: fists pulled back). For a reference point, look at the “Exit” sign in the background.

Compare the height of the barbell in the photo on the left (incorrect: fists not pulled back) with the height of the barbell in the photo on the right (correct: fists pulled back). For a reference point, look at the “Exit” sign in the background.

The cue “Pull your fists back” implies that - when you’re set up on the bench with the bar locked out overhead on straight arms - you’re going to try to pull your fists back toward you as far as possible (i.e., as close to you as possible) without bending your elbows. You can try this with or without a bar, and either way, you’ll find that you can actually pull your fists back toward you at least an inch or two, and having done so, you will have successfully retracted your shoulder blades into the correct position without having ever thought about your shoulders.

Pull your fists back the next time you set up on the bench - it will help you develop a stronger and more efficient bench press, and that’s always a good thing. If you’re interested in more tips to help your bench press, check out the video below: